KAP-HN – The incredibly hard-wearing breathing air compressors for continuous operation in civil and military shipping
Perfect for demanding requirements at sea: Intercoolers and aftercoolers made from rust-free stainless steel. For high corrosion resistance
Ideal for use in professional applications: High air delivery rates in continuous operation thanks to industrial roller bearings
Fully automatic compressor control: B-CONTROL MICRO
Little space required: Thanks to compact horizontal design
A low centre of gravity and clever design with special shock absorbers and robust shock and damping elements make the KAP-HN series by BAUER KOMPRESSOREN ideal for continuous operation at sea under the harshest of conditions.
Thanks to their horizontal design, they take up little space when installed and are even capable of operation in heavy seas and on steep slopes.
Extremely hard-wearing compressor blocks and piston rings made from an innovative high-tech plastic combined with plasma-nitrided and plateau-honed cylinders virtually eliminate wear. The intercoolers and aftercoolers are made from stainless steel for high corrosion resistance.
Can be expanded to rise to any challenge: the extensive range of BAUER accessories provides the basis for flexible adaptation to meet all manner of requirements.
All the information you need at your fingertips!
IK 15.1/150/180 compressor blocks
The compressor stages, which are located on sides of the compressor blocks, are the key to optimum smooth running and high efficiency. The free-standing cylinders are easy to access and maintain. Read more
Filter system P 41 DUO
With two filter housings, additional oil and water separator and pressure retention check valve, this system can be relied upon to keep your breathing air clean.
A type-tested and sealed final pressure safety valve optimises operational safety. 2200 standard cubic metres of air can be treated.
Additional intermediate separator after the first stage
In the case of operation in locations where air humidity is high (tropical regions, for example), we recommend installing a separator downstream of the first compressor stage. This can extend the service life of the unit and reduce maintenance costs.
Intermediate pressure gauge kit
The intermediate pressure gauges show the operating pressure of the individual compressor stages. This information about the pressure is used to check the corresponding stage valves (inlet and outlet) for leaks so that potential faults can be detected quickly. The intermediate pressure gauges are installed inside the compressor housing.
All electric motors are available with other voltages and frequencies on request. A voltage range from 110 to 690 V at 50/60 Hz is covered.
60 l condensate collection system
This convenient system provides a central collection point for the condensate (oil and water mixture) produced during the compression process inside the compressor. The condensate tank features an integrated float switch which can be relied upon to monitor the level of condensate in the tank and provides protection against overfilling. A combined silencer and filter unit prevents pollution caused by noise or odour.
|Charging rate ¹||Max. operating |
L × W × H
|KAP 15.1-7.5-HN||370||13||330||1050||7.5||P 41 DUO||480||1050||165 × 72.5 × 92|
|KAP 150-11-HN||540||19||330||1230||11||P 41 DUO||505||1110||165 × 72.5 × 92|
|KAP 180-15-HN||660||23||330||1320||15||P 41 DUO||520||1150||165 × 72.5 × 92|
¹ Measured with cylinder filling (10 l) from 0 to 200 bar, ±5%